At each point of its domain, the function ______
- AIs defined
- BIs continuous
- CIs infinite
- DHas a limit
By definition a function assigns a value to every point of its domain; continuity or limits are not guaranteed.
Syllabus: lectures 1–22. Past-paper MCQs are shown first.Syllabus: lecture 1–22. Past paper ki MCQs pehle dikhai gayi hain.
66 MCQs · 9 short · 13 long questions · 64 MCQs from past papers66 MCQs · 9 short · 13 long sawal · 64 MCQs past papers se
At each point of its domain, the function ______
By definition a function assigns a value to every point of its domain; continuity or limits are not guaranteed.
The domain of the function f(x, y) = √(y − x²) is
The square root needs y − x² ≥ 0.
Consider f(x, y, z) = √(1 − x² − y² − z²). What is the value of f(0, 1/2, 1/2)?
1 − 0 − 1/4 − 1/4 = 1/2, so f = √(1/2).
π is an example of ______
π cannot be written as a ratio of integers.
The level curves of f(x, y) = y csc x are parabolas.
y csc x = k gives y = k sin x, which are sine curves, not parabolas.
There is one-to-one correspondence between the set of points on co-ordinate line and ____.
Each point on the number line corresponds to exactly one real number.
Intersection of two straight lines is ______
Two distinct non-parallel lines meet in a single point.
A straight line is a special kind of ______
A straight line is a curve with constant direction (zero curvature).
At which point does the vertex of the parabola y = x² − 4x + 3 occur?
Vertex x = −b/2a = 2, and y(2) = 4 − 8 + 3 = −1.
The equation y = x² − 4x + 2 represents a parabola. At which point does its vertex occur?
Vertex x = −b/2a = 2, and y(2) = 4 − 8 + 2 = −2.
Plane is a ______ surface.
A plane has length and breadth only, so it is two-dimensional.
Let (x₁, y₁, z₁) and (x₂, y₂, z₂) be any two points in three-dimensional space. What does the formula √[(x₂ − x₁)² + (y₂ − y₁)² + (z₂ − z₁)²] calculate?
This is the 3-D distance formula; the midpoint would be the average of coordinates.
Which of the following are direction ratios for the line joining the points (1, 3, 5) and (2, −1, 4)?
Direction ratios are the coordinate differences: 2−1, −1−3, 4−5 = 1, −4, −1.
______ planes intersect at right angles to form three-dimensional space.
The three coordinate planes (xy, yz, zx) are mutually perpendicular and form 3-D space.
If the positive directions of the x- and y-axes are known, then ______ the positive direction of the z-axis.
A right-handed coordinate system fixes the positive z-axis by the right-hand rule.
What is the distance between the points (3, 2, 4) and (6, 10, −1)?
d = √(3² + 8² + (−5)²) = √98 = 7√2.
The equation ax + by + cz + d = 0, where a, b, c, d are real numbers, is the general equation of which of the following?
A linear equation in x, y, z represents a plane.
An ordered triple corresponds to ______ in three-dimensional space.
Each ordered triple (x, y, z) fixes exactly one point.
The angles which a line makes with the positive x-, y- and z-axes are known as ______
The angles themselves are direction angles; their cosines are direction cosines.
Plane is an example of ____.
A plane is a (flat) surface in 3-space.
Symmetric equation for the line through (1, 3, 5) and (2, −2, 3) is
Direction vector is (1, −5, −2); through (1, 3, 5) this gives x − 1 = (y − 3)/(−5) = (z − 5)/(−2).
The spherical coordinates of a point are (√3, π/3, π/2). What are its cylindrical coordinates?
With (ρ, θ, φ): r = ρ sin φ = √3, θ = π/3, z = ρ cos φ = 0.
The equation z = r is written in
r and z together are cylindrical coordinates; z = r is a cone.
Is the function f(x, y) = 4xy + sin(3x²y) continuous at the origin? If not, why?
It is a sum of continuous polynomial and sine compositions, so it is continuous everywhere.
Is the function f(x, y) = xy/(x² + y²) continuous at the origin? If not, why?
Along y = mx the value is m/(1+m²), which depends on m, so the limit does not exist.
lim_(x,y)→(0,0) xy²/(x² + y²) =
|xy²/(x² + y²)| ≤ |x| → 0, so the limit is 0.
If f(x, y) = x²y − y³ + ln x, then ∂²f/∂x² =
f_x = 2xy + 1/x, so f_xx = 2y − 1/x².
Let w = f(x, y, z) and x = g(r, s), y = h(r, s), z = t(r, s). Then by the chain rule ∂w/∂r =
w depends on r through x, y and z, so sum ∂w/∂(each variable) times its ∂/∂r.
Suppose f(x, y) = xy − 2y² where x = 3t + 1 and y = 2t. Which one of the following is true?
df/dt = y·3 + (x − 4y)·2 = 6t + 2(3t + 1 − 8t) = −4t + 2.
The graph of an even function is symmetric about the
f(−x) = f(x) mirrors the graph in the y-axis.
What is the relation between the direction of the gradient at a point on a surface and the tangent plane at that point?
The gradient is normal to the level surface, so it is perpendicular to the tangent plane.
Two surfaces are said to intersect orthogonally if their normals at every common point are
Orthogonal surfaces have perpendicular normals where they meet.
If R = {(x, y) : 0 ≤ x ≤ 2 and 1 ≤ y ≤ 4}, then ∬_R (6x² + 4xy³) dA =
Inner integral in x runs 0 to 2 and outer integral in y runs 1 to 4.
If R = {(x, y) | 0 ≤ x ≤ 2 and −1 ≤ y ≤ 1}, then ∬_R (x + 2y²) dA =
The inner integral is in x from 0 to 2 and the outer in y from −1 to 1.
Which of the following sets is the union of the sets of rational and irrational numbers?
Every real number is either rational or irrational, so their union is ℝ.
√((x₂ − x₁)² + (y₂ − y₁)² + (z₂ − z₁)²) shows ________ (x₁, y₁, z₁) and (x₂, y₂, z₂).
This is the three-dimensional distance formula.
Domain of the function f(x, y) = √(y − x²) satisfies the condition ________
The square root is real only when y − x² ≥ 0.
If rectangular coordinates of a point are (1, √3, −2), then the value of "r" in cylindrical coordinates is ________
r = √(x² + y²) = √(1 + 3) = 2.
Suppose f(x, y) = x³e^(xy). Which of the following options is correct?
Treating x as constant, ∂/∂y(x³e^(xy)) = x³·x e^(xy) = x⁴e^(xy).
The function decreases most rapidly in the direction of ________
The directional derivative is most negative in the direction opposite to the gradient.
Two surfaces are said to be orthogonal at a point of their intersection if their normals at that point are ________
Surfaces are orthogonal when their normal vectors at the common point are perpendicular.
For a function f(x, y) to have both absolute maximum and minimum, it must be continuous on ________ set R.
The extreme value theorem guarantees both extrema for a continuous function on a closed and bounded set.
If R = {(x, y) : 2 ≤ x ≤ 4 and 0 ≤ y ≤ 1}, then ∬_R (4xe^(2y)) dA = ________
The inner integral runs over x from 2 to 4 (dx) and the outer over y from 0 to 1 (dy).
Which of the following is the geometrical representation of the set of real numbers?
Real numbers correspond one-to-one with points on a coordinate (number) line.
Which of the following is the interval notation of the real line?
The whole real line is the interval (−∞, +∞).
Gradient of a scalar function always results in a ________ function.
∇f = (f_x, f_y, f_z) is a vector-valued function.
The two normal lines for the surfaces f(x, y, z) = 0 and g(x, y, z) = 0 are orthogonal if and only if ________, where f_x, f_y, f_z and g_x, g_y, g_z are direction ratios for the two normal lines respectively.
Two lines are orthogonal when the dot product of their direction ratios is zero.
Which of the following number is associated to each point on a co-ordinate line?
Every point of a coordinate line corresponds to exactly one real number.
If a function is not defined at some point, then its limit ----------- exist at that point.
A limit depends only on nearby values, so it may exist even where the function is undefined.
By Extreme Value Theorem, if a function is continuous on a closed and bounded set R, then it has both ---------------- on R.
The Extreme Value Theorem guarantees absolute extrema for continuous functions on closed bounded sets.
Which of the following is associated to each point in a three dimensional space?
A point in 3D space needs three coordinates, i.e. an ordered triple.
What is the distance between points (3, 2, 0) and (1, 0, −1)?
√((3−1)² + (2−0)² + (0+1)²) = √9 = 3.
In three dimensional space, intersection of two surfaces is a -------------
Two surfaces generally meet along a curve in space.
The surface z = ln(x² + y²) has a hole at the point (0, 0), therefore, it will be a ......... function.
ln(x² + y²) is undefined at the origin, so the function is discontinuous there.
Suppose f(x, y) = x³e^(xy). Which of the following options is correct?
Product rule: (x³)′e^(xy) + x³·y e^(xy).
If f(x, y) and all of its partial derivatives are continuous then ∂³f/∂y²∂x = ..........
With continuous partials the order of differentiation does not matter: one x and two y derivatives give ∂³f/∂x∂y².
If u = f(r, s) and r = g(t), s = h(t), then r and s are called ..........
r and s link u to the independent variable t, so they are intermediate variables.
If two vectors a⃗ and b⃗ have the relation a⃗ = λb⃗ where λ is a non-zero scalar then a⃗ and b⃗ are .......... to each other.
A non-zero scalar multiple of a vector lies along the same line, so the vectors are parallel.
fₓ(P₀)(x − x₀) + f_y(P₀)(y − y₀) + f_z(P₀)(z − z₀) = 0 is the equation of .............
A plane through P₀ with normal ∇f(P₀) is the tangent plane to f(x, y, z) = 0 at P₀.
Given a surface f(x, y, z) = 0. The direction ratios of a line normal to the surface are ..........
The normal line is along ∇f, whose components are fₓ, f_y, f_z.
For a function z = f(x, y), the total differential is defined as ..........
The total differential adds each partial derivative times the change in its own variable.
At the critical point (x₀, y₀), if D = fₓₓ(x₀, y₀)f_yy(x₀, y₀) − f_xy²(x₀, y₀) = 0 then ..........
When D = 0 the second partial derivative test is inconclusive.
For a function f(x), if f′(x) is equal to some non-zero constant, then f(x) will have ..........
f′ exists everywhere and is never zero, so there is no critical point.
Double integral of a function f(x, y) represents .......... of the region between the surface defined by the function and the plane which contains its domain.
For f ≥ 0, ∬f dA is the volume of the solid under the surface and above the region.
If (4, π/3, −4) is a point in cylindrical coordinates, then the same point in rectangular coordinates is given by
x = r cos θ = 4·½ = 2, y = r sin θ = 4·(√3/2) = 2√3, z = −4.
Let a = (4/3)î + ĵ and b = 4î + 3ĵ, then
a = (1/3)(4î + 3ĵ) = b/3, so a is a positive scalar multiple of b (a·b = 25/3 = |a||b|, cos θ = 1).
No MCQs match this filter.Is filter mein koi MCQ nahi.
Given a × b = 3x î + 2y ĵ + x k̂ and c = 7x î + 4y k̂. Find the scalar triple product of these vectors.
(a × b)·c = (3x)(7x) + (2y)(0) + (x)(4y) = 21x² + 4xy.
A line in three-dimensional space passes through the point (3, −4, 2) and is parallel to the vector n = 4î + 3ĵ + 6k̂. Write down the equation of this line in parametric and symmetric form.
Parametric form: x = 3 + 4t, y = −4 + 3t, z = 2 + 6t (t ∈ ℝ). Symmetric form: (x − 3)/4 = (y + 4)/3 = (z − 2)/6.
Let f(x, y) = tan⁻¹(y/x) − y² tan⁻¹(x/y). Is the function defined at (1, 1)? If yes, what is its value; if no, give the reason.
Yes. At (1, 1) neither x nor y is zero, so both quotients are defined: f(1, 1) = tan⁻¹(1) − 1²·tan⁻¹(1) = π/4 − π/4 = 0.
If the order of integration for the integral ∫₀² ∫_(y²)⁴ y cos x² dx dy is changed, find the limits of the new integral.
Region: 0 ≤ y ≤ 2, y² ≤ x ≤ 4, i.e. bounded by x = y², x = 4 and y = 0. Equivalently 0 ≤ x ≤ 4 and 0 ≤ y ≤ √x. New integral: ∫₀⁴ ∫₀^(√x) y cos x² dy dx. (Its value is ∫₀⁴ (x/2) cos x² dx = (1/4) sin 16.)
State the condition when ∬_R f(x, y) dA = ∫_c^d ∫_a^b f(x, y) dx dy = ∫_a^b ∫_c^d f(x, y) dy dx, where R is the region of integration.
This holds (Fubini's theorem) when R is the rectangle a ≤ x ≤ b, c ≤ y ≤ d and f is continuous on R. Then the double integral can be computed as an iterated integral in either order.
Find the critical point of the function f(x, y) = 6x² + xy − 2y² along the line y = 3x + 1, at which the absolute extrema of the function can occur.
Substitute y = 3x + 1: g(x) = 6x² + x(3x + 1) − 2(3x + 1)² = 6x² + 3x² + x − 18x² − 12x − 2 = −9x² − 11x − 2. g′(x) = −18x − 11 = 0 gives x = −11/18, so y = 3(−11/18) + 1 = −5/6. Critical point: (−11/18, −5/6).
Write down the equation of a plane passing through the point (2, −3, 1) and perpendicular to the vector n⃗ = 16î + 6ĵ + 6k̂.
Point-normal form: 16(x − 2) + 6(y + 3) + 6(z − 1) = 0. 16x − 32 + 6y + 18 + 6z − 6 = 0 ⇒ 16x + 6y + 6z − 20 = 0, i.e. 8x + 3y + 3z = 10.
Let y = 1/x². If x changes from 3 to 3.3, find the approximate change in the value of y using differential dy.
dy = −2/x³ dx. Here x = 3, dx = 0.3. dy = −2/27 × 0.3 = −0.6/27 = −1/45 ≈ −0.0222. So y decreases by about 0.022 (exact change 1/10.89 − 1/9 ≈ −0.0193).
Find f_wwx for the function f(w, x, y, z) = w²xyz − 5e^{wz²}.
f_w = 2wxyz − 5z²e^{wz²}; f_ww = 2xyz − 5z⁴e^{wz²}; f_wwx = 2yz.
Consider the point (−5, 5, 6) in the rectangular coordinate system. Convert it into spherical coordinates.
ρ = √(x² + y² + z²) = √(25 + 25 + 36) = √86 ≈ 9.27. θ: tan θ = y/x = −1 with x < 0, y > 0 (second quadrant), so θ = 3π/4. φ = cos⁻¹(z/ρ) = cos⁻¹(6/√86) ≈ 0.867 rad ≈ 49.7°. Spherical coordinates (ρ, θ, φ) = (√86, 3π/4, cos⁻¹(6/√86)).
Find the equation of the tangent plane to the surface f(x, y, z) = x² + 3y + z³ − 9 = 0 at the point (2, −1, 2).
Check: 4 − 3 + 8 − 9 = 0, so the point is on the surface. ∇f = (2x, 3, 3z²) = (4, 3, 12) at (2, −1, 2). Tangent plane: 4(x − 2) + 3(y + 1) + 12(z − 2) = 0, i.e. 4x + 3y + 12z − 29 = 0.
If f(x, y) = (x − 4) ln(xy), find both first-order partial derivatives.
f_x = ln(xy) + (x − 4)·(y/(xy)) = ln(xy) + (x − 4)/x. f_y = (x − 4)·(x/(xy)) = (x − 4)/y.
Find equation of tangent plane to the surface f(x, y, z) = 4x² + 9y² − z (i.e. 4x² + 9y² − z = 0) at the point (−2, −1, 25).
Check: 4(4) + 9(1) − 25 = 0, so the point lies on the surface. fₓ = 8x = −16, f_y = 18y = −18, f_z = −1 at (−2, −1, 25). Tangent plane: −16(x + 2) − 18(y + 1) − 1(z − 25) = 0 ⇒ 16x + 32 + 18y + 18 + z − 25 = 0 ⇒ 16x + 18y + z + 25 = 0.
Evaluate the double integral ∫₋₁¹ ∫₀² (1 − 6x²y) dx dy.
Inner (x from 0 to 2): [x − 2x³y]₀² = 2 − 16y. Outer (y from −1 to 1): ∫₋₁¹ (2 − 16y) dy = [2y − 8y²]₋₁¹ = (2 − 8) − (−2 − 8) = 4. Answer: 4.
Using a definite integral, find the area of the region enclosed between the curves y = x² and y = √x.
The curves meet where x² = √x, i.e. x = 0 and x = 1. On [0, 1], √x ≥ x². Area = ∫₀¹ (√x − x²) dx = [(2/3)x^{3/2} − x³/3]₀¹ = 2/3 − 1/3 = 1/3 square units.
Evaluate the iterated integral ∬_R x√(1−x²) dA, R = {(x, y): 0 ≤ x ≤ 1, 2 ≤ y ≤ 3}.
∬_R x√(1−x²) dA = ∫₀¹ ∫₂³ x√(1−x²) dy dx = ∫₀¹ x√(1−x²)·[y]₂³ dx = ∫₀¹ x√(1−x²) dx. Put u = 1−x², du = −2x dx: = −½∫₁⁰ u^{1/2} du = ½∫₀¹ u^{1/2} du = ½·(2/3)u^{3/2}|₀¹ = 1/3.
Find the directional derivative D_u f(−2, 0) of f(x, y) = x² − 3xy + 4y³ in the direction of u = î + 2ĵ at the point (−2, 0).
f_x = 2x − 3y, f_y = −3x + 12y². At (−2, 0): ∇f = (−4, 6). |u| = √(1+4) = √5, unit vector = (1/√5, 2/√5). D_u f(−2,0) = ∇f·û = (−4·1 + 6·2)/√5 = 8/√5 = 8√5/5 ≈ 3.58.
Find the centre and radius of the sphere x² + y² + z² − 8x + 6y + 12z = 3.
Complete the squares: (x² − 8x + 16) + (y² + 6y + 9) + (z² + 12z + 36) = 3 + 16 + 9 + 36, so (x − 4)² + (y + 3)² + (z + 6)² = 64. Centre (4, −3, −6), radius √64 = 8.
Locate all the relative maxima, relative minima and saddle points for the function f(x, y) = x² + y² − x²y.
f_x = 2x − 2xy = 2x(1 − y), f_y = 2y − x². f_x = 0 gives x = 0 or y = 1. x = 0 → y = 0: (0, 0). y = 1 → x² = 2: (√2, 1), (−√2, 1). Second derivatives: f_xx = 2 − 2y, f_yy = 2, f_xy = −2x; D = f_xx f_yy − f_xy² = 2(2 − 2y) − 4x². At (0, 0): D = 4 > 0, f_xx = 2 > 0 → relative minimum, f(0,0) = 0. At (±√2, 1): D = 0 − 8 = −8 < 0 → saddle points (f = 2). There is no relative maximum.
Locate critical points for the function f(x, y) = xy + a³/x + b³/y (a ≠ 0, b ≠ 0).
f_x = y − a³/x² = 0 → y = a³/x². f_y = x − b³/y² = 0 → x = b³/y². Substitute: x = b³x⁴/a⁶ → x³ = a⁶/b³ (x ≠ 0) → x = a²/b, then y = a³b²/a⁴ = b²/a. Only critical point: (a²/b, b²/a) (f is undefined on x = 0 or y = 0). (Extra: f_xx = 2a³/x³ = 2b³/a³, f_yy = 2b³/y³ = 2a³/b³, f_xy = 1, D = 4 − 1 = 3 > 0, so it is a relative minimum if ab > 0 and a relative maximum if ab < 0.)
Set up a double integral for the volume bounded by the surface z = √(x² + y²), y = 4 − x², and the first octant. (Do not evaluate.)
The solid lies under z = √(x² + y²) and above the region in the first quadrant of the xy-plane bounded by x = 0, y = 0 and y = 4 − x² (x from 0 to 2). V = ∬_R √(x² + y²) dA = ∫₀² ∫₀^{4−x²} √(x² + y²) dy dx (equivalently ∫₀⁴ ∫₀^{√(4−y)} √(x² + y²) dx dy).
Determine whether u and v make an acute angle, an obtuse angle, or are orthogonal: u = 7î + 3ĵ + 5k̂, v = −8î + 4ĵ + 2k̂.
u·v = 7(−8) + 3(4) + 5(2) = −56 + 12 + 10 = −34. Since u·v < 0, cos θ < 0, so u and v make an obtuse angle.