Paper Tayyari

Lecture 9: Limits (Intuitive Introduction)

MCQs, short and long questions from lecture 9.Lecture 9 ki MCQs, short aur long sawal.

22 MCQs · 1 short question22 MCQs · 1 short sawal

Start mock testMock test shuru karein
DoneHal kiye 0/22
– correctsahi
1.

Traditionally, the calculus that comes out of the tangent problem is called

  1. AMultiplicational calculus
  2. BNon-differential calculus
  3. CDifferential calculus
  4. DAll of these
2.

Calculus that comes out of the area problem is called

  1. ADifferential calculus
  2. BNon-differential calculus
  3. CIntegral calculus
  4. DMultiplicational calculus
3.

In geometry, a line is called ____ to a circle if it meets the circle at exactly one point

  1. Acoordinates
  2. Bnegative line
  3. Cpositive line
  4. Dtangent
4.

Consider a point P on a curve in the xy-plane. Let Q be another point other than P on the curve. Draw a line through P and Q to get what is called the ____ line for the curve. Now move the point Q toward P. The secant line will rotate to a 'limiting' position as Q gets closer and closer to P. The line that will occupy this limiting position will be called the ____ line at P

  1. ATangent, Secant
  2. BSecant, Tangent
  3. CTangent, Tangent
  4. DSecant, Secant
5.

If we let our rectangles increase in number, then the approximation will be better and the result will be getting a ____ on the number of rectangles.

  1. ALimiting value
  2. BNon-limiting value
  3. CTangent
  4. DCoordinates
6.

____ are basically a way to study the behavior of the y-values of a function in response to the x-values as they approach some number or go to infinity

  1. ALimits
  2. BTangents
  3. CCircles
  4. DLines
7.

Consider f(x) = sin(x)/x where x is in

  1. ALimits
  2. BBrackets
  3. CRadians
  4. DAll of these
8.

Remember that π radians = ?

  1. A150 degrees
  2. B180 degrees
  3. C0 degrees
  4. D90 degrees
9.

[For f(x) = sin(x)/x] f(x) is not defined at x =

  1. A0
  2. B90
  3. C80
  4. D180
10.

What field of mathematics was initially motivated by finding areas of plane regions and tangent lines to curves?

  1. ATrigonometry
  2. BCalculus
  3. CGeometry
  4. DAlgebra
11.

What calculus branch arises from the area problem?

  1. ADifferential Calculus
  2. BIntegral Calculus
  3. CAnalytical Calculus
  4. DGeometric Calculus

Finding areas leads to integral calculus; finding tangent lines leads to differential calculus.Areas nikalne se integral calculus aata hai; tangent lines nikalne se differential calculus.

12.

How are tangent lines and area calculations related to the concept of limit?

  1. AThey both involve the concept of curvature
  2. BTheir precise definitions depend on the fundamental notion of a limit
  3. CThey are unrelated concepts in calculus
  4. DLimits are not involved in tangent lines or area problems

Both the slope of a tangent line and the area under a curve are defined as limits.Tangent line ka slope aur curve ke neeche area dono limits ke tor par define hote hain.

13.

How is the tangent line to a general curve at a point P defined?

  1. AA secant line through P turned by a fixed angle
  2. BA line meeting the curve at exactly one point
  3. CA line through the centre of a circle
  4. DThe limiting position of secant lines PQ as Q moves toward P

Take secant lines through P and a nearby point Q; as Q → P they approach the tangent line.P aur qareeb ke point Q se secant lines lo; jab Q → P to yeh tangent line ki taraf jati hain.

14.

How is a limit used to find the area between a curve and the x-axis?

  1. AApproximate the region by rectangles and let their number increase without bound
  2. BApply trigonometric functions to the curve
  3. CMeasure the curve's length
  4. DApproximate the region by circles

Sum rectangle areas; as rectangles get thinner and more numerous, the sum approaches the exact area.Rectangles ke areas jama karo; jab rectangles patle aur zyada hote hain to sum exact area ki taraf jata hai.

15.

What happens to the accuracy of the area calculation as the number of rectangles used for approximation increases?

  1. AThe accuracy decreases
  2. BThe area calculation becomes less reliable
  3. CThe approximation gets better, approaching a limiting value
  4. DThe approximation remains the same

More, thinner rectangles fit the region better, so the sums approach the exact area.Zyada aur patle rectangles region mein behtar fit hote hain, isliye sums exact area ki taraf jate hain.

16.

What does the limit represent in the context of a function?

  1. AThe highest value of the function
  2. BThe lowest value of the function
  3. CThe behavior of the function's y-values as x-values approach a number or infinity
  4. DThe number where the function is defined

A limit describes what y-values approach as x approaches a number or ±∞.Limit batati hai ke jab x kisi number ya ±∞ ki taraf jaye to y-values kis taraf jati hain.

17.

What does the notation lim_(x→0) sin x represent?

  1. AThe limit of sin x as x approaches 0
  2. Bsin x evaluated at 0
  3. CThe derivative of sin x at 0
  4. DThe integral of sin x from 0 to x

'lim' with x→0 underneath means the value sin x approaches as x gets close to 0.'lim' ke neeche x→0 ka matlab hai woh value jis ki taraf sin x jata hai jab x 0 ke qareeb ho.

18.

What is the significance of the right-hand limit for a function?

  1. AIt represents the limit from negative infinity
  2. BIt signifies the limit as x approaches from the right of a specific value
  3. CIt represents the limit from positive infinity
  4. DIt's the limit of the function at zero

lim_(x→a⁺) f(x) uses only x-values greater than a.lim_(x→a⁺) f(x) mein sirf a se bari x-values use hoti hain.

19.

When does the two-sided limit lim_(x→a) f(x) exist?

  1. AWhen the left-hand and right-hand limits are different
  2. BWhenever f(a) is defined
  3. CWhen the left-hand and right-hand limits both exist and are equal
  4. DWhen f has a local maximum at a

The two-sided limit exists exactly when both one-sided limits exist and agree.Two-sided limit sirf tab exist karti hai jab dono one-sided limits exist karein aur barabar hon.

20.

In which situation does lim_(x→a) f(x) fail to exist?

  1. Af has a local minimum at a
  2. Bf oscillates between two values infinitely often as x → a
  3. Cf has a horizontal asymptote
  4. Df is a polynomial

Example: sin(1/x) keeps swinging between −1 and 1 near 0, so it approaches no single value.Misal: 0 ke qareeb sin(1/x) −1 aur 1 ke beech jhoolta rehta hai, isliye kisi ek value ki taraf nahi jata.

21.

If f(x) grows without bound as x → a, what can be said about lim_(x→a) f(x)?

  1. AIt is a finite number
  2. BIt exists only toward +∞
  3. CIt does not exist as a finite number
  4. DIt always equals −∞

An unbounded function cannot approach a single real number (we may write +∞ or −∞ to describe how it fails).Unbounded function kisi ek real number ki taraf nahi ja sakta (yeh batane ke liye ke kaise fail hota hai hum +∞ ya −∞ likh sakte hain).

22.

Why can a table of values sometimes give a wrong guess for a limit?

  1. AThe function may oscillate, and the chosen x-values may hide this
  2. BThe function converges
  3. CThe function is continuous
  4. DThe function is differentiable

Example: sin(π/x) is 0 at x = 1, 1/2, 1/3, ..., but it has no limit at 0.Misal: sin(π/x) x = 1, 1/2, 1/3, ... par 0 hai, lekin 0 par iski koi limit nahi.