Formally named --------------- informally known as thin wire ethernet or thin net.
- A10 Base 2
- B10 Base 5
- C10 Base T
- DNone of the given
10Base2 is the formal name of thin coaxial (thinnet) Ethernet.
MCQs, short and long questions from lecture 12.Lecture 12 ki MCQs, short aur long sawal.
13 MCQs · 6 short questions · 13 MCQs from past papers13 MCQs · 6 short sawal · 13 MCQs past papers se
Formally named --------------- informally known as thin wire ethernet or thin net.
10Base2 is the formal name of thin coaxial (thinnet) Ethernet.
Formally named __________ informally known as the thick wire Ethernet or Thick net.
10Base5 is the formal name of thick wire Ethernet.
Formally named __________ informally known as the twisted pair Ethernet or TP Ethernet.
10Base-T is the formal name of twisted pair Ethernet.
A network uses a ------arranges for computers to be connected in a closed loop.
In a ring topology the computers form a closed loop.
NICs can provide all three-connection technologies
Twisted pair uses RJ-45, thick Ethernet uses an AUI cable to a transceiver, and thin Ethernet uses BNC.
........ is effectively a very short Ethernet with very long AUI cables. It can be connected into larger Ethernet
A hub behaves like a very short shared Ethernet segment to which each station attaches.
________network topology is a bus but wiring topology is a star
10Base-T wires stations in a star to a hub that logically works as a bus.
Thin Ethernet is known as-------------
Thin Ethernet (Thinnet) is 10Base2; 10Base5 is thick and 10BaseT is twisted pair.
AUI cable connects from NIC to---------------
In thick Ethernet the AUI cable runs from the NIC to the transceiver on the coax.
What will be the bandwidth rate for future (possibly 10 Gigabyte) Ethernet?
The cable category planned for future 10 Gigabit Ethernet is rated at 600 MHz.
What will be the bandwidth rate for 1000Base-T Gigabyte or ATM?
The cable category for 1000Base-T or ATM is rated at 250 MHz.
Which statement is incorrect according to 10Base-T standard of TP Ethernet?
10Base-T is a LAN wiring scheme, not a WAN scheme.
Thin Ethernet is the
Thin wire Ethernet (thinnet) is 10Base2.
No MCQs match this filter.Is filter mein koi MCQ nahi.
Why 10-base T wiring scheme is called star shaped bus wiring scheme.
In 10Base-T every computer is connected by its own twisted pair cable to a central hub, so the physical wiring looks like a star. Inside the hub, electronics connect all the cables so that they behave like one shared Ethernet cable: every station hears every transmission and CSMA/CD is used. So logically it works as a bus. Hence it is a star-shaped bus.
Give a comparison of wiring Schemes.
Thick Ethernet (10Base5): thick coaxial cable forms a bus; each computer needs an external transceiver and AUI cable; segment up to 500 m; costly and hard to install. Thin Ethernet (10Base2): thin, flexible coaxial cable connected directly to each computer with BNC T-connectors; transceiver on the card; cheaper, shorter segments (about 185 m); a break in the cable disrupts the whole segment. Twisted pair Ethernet (10Base-T): each computer has its own twisted pair cable with RJ-45 connectors to a central hub (star wiring, logical bus); cheapest and easiest to install and manage, and one failed cable affects only one computer.
What is 10base T?
10Base-T is twisted pair Ethernet: 10 Mbps baseband Ethernet over unshielded twisted pair cable. Each computer connects with an RJ-45 connector to its own cable that runs to a central hub, so the wiring is a physical star while the hub makes it behave as a logical bus using CSMA/CD.
Briefly explains the working structure of thick Ethernet.
Thick Ethernet (10Base5) uses a thick coaxial cable as a shared bus with terminators at both ends to stop signal reflection. Each computer has a transceiver attached to the coax, and an AUI (drop) cable connects the NIC to the transceiver; the AUI cable carries digital signals, power and control, and the transceiver sends and senses the analog signal on the coax.
Thick Ethernet working structure?
Thick Ethernet (10Base5) uses a thick coaxial cable as a bus. Each station's NIC connects through an AUI cable to a transceiver attached directly to the coax; the transceiver sends and receives signals, senses the carrier and detects collisions. Terminators at both ends of the cable stop signal reflections.
Difference between physical and logical topologies
Physical topology is the actual layout of the wiring and devices. Logical topology is the way data flows between stations, which can differ; for example, 10Base-T is physically a star but logically a bus.
No long questions added yet.Abhi koi long sawal shamil nahi.