Effective network means that the network has fast delivery, timeliness and ______.
- Ahigh bandwidth
- Bduplex transmission
- Caccurate transmission
- Dlow bandwidth
Network effectiveness rests on delivery, accuracy and timeliness.
Questions from past midterm papers.Pichhle midterm papers ke sawal.
79 MCQs · 79 MCQs from past papers79 MCQs · 79 MCQs past papers se
Effective network means that the network has fast delivery, timeliness and ______.
Network effectiveness rests on delivery, accuracy and timeliness.
A set of devices connected by communication links is called networking.
A network is a set of devices (nodes) connected by communication links.
Which one best describes the given statement: "To allow multiple users to share total capacity of a transmission medium"?
Multiplexing lets several users share the capacity of one link.
Line configuration refers to the way two or more devices attach to a ______.
Line configuration (point-to-point or multipoint) describes how devices attach to a link.
______ requires the maximum number of I/O ports.
In a mesh every device needs n-1 I/O ports, one per other device.
______ is used to define the direction of the signal flow between the linked devices.
Transmission mode (simplex, half-duplex, full-duplex) defines direction of signal flow.
Unidirectional traffic movement is overcome by dual ring technology.
A second ring carrying traffic in the opposite direction removes the one-direction limitation of a ring.
Trailer is only added at ______ layer of OSI model.
Only the data link layer usually adds a trailer (for error detection).
Data link layer deals with mechanical and electrical specifications of transmission medium and interface.
Mechanical and electrical specifications belong to the physical layer, not the data link layer.
A signal that repeats a pattern over a regular interval of time is called ______.
A periodic signal completes a pattern within a measurable time frame (period) and repeats it.
If there is ______ in voltage then the frequency is infinite.
A change in zero time (instantaneous) means infinite frequency; no change means zero frequency.
In a time-domain plot, the horizontal axis is a measure of ______.
A time-domain plot shows amplitude (vertical) against time (horizontal).
DC component is also termed as direct current component or a component with non-zero frequency.
A DC component has zero frequency, so the statement is false.
Quantization means measuring amplitudes of signal at equal intervals.
Measuring amplitude at equal intervals is sampling; quantization assigns sampled values to fixed levels.
Amplitude in ASK is more resistive to EMI and noise.
Noise usually alters amplitude, so ASK is highly susceptible to EMI and noise.
ASK, PSK, FSK and QAM are examples of ______ modulation.
These schemes change a carrier's properties to carry digital data, i.e. digital-to-analog conversion.
The bit rate always equals the baud rate in which type of signal?
In (binary) FSK each signal element carries one bit, so bit rate equals baud rate.
Asynchronous transmission is ______.
Start/stop bits and gaps add overhead, making asynchronous transmission slower than synchronous.
A ______ converts an analog signal into a digital signal.
A demodulator recovers digital data from a modulated analog signal.
In a ring, if a station does not receive its signal up to a specified time, the system issues an alarm to ______.
The alarm alerts the network operator/manager to the problem and its location.
The information to be communicated in a data communications system is the ______.
The message is the data (information) being communicated.
Which is not an element of protocol?
Protocol elements are syntax, semantics and timing.
Which topology requires a central controller or hub?
In a star topology every device links to a central hub that controls traffic.
Layers 5, 6 and 7 are also called network support layers.
Layers 5-7 are user support layers; layers 1-3 are network support layers.
Internet with small "i" specifies the world wide network, the actual Internet.
A lowercase "internet" is any interconnection of networks; the capital "I" Internet is the worldwide one.
Data synchronization is a function related with ______.
The session layer inserts synchronization points (checkpoints) into the data stream.
OSI model was developed prior to TCP/IP model.
TCP/IP was developed before the OSI model was published.
Frequency band in which 99% of the total power resides is called ______.
The band holding 99% of a signal's power is its power bandwidth.
In differential Manchester we require two transitions or signal changes to represent binary ______.
Bit 0 has a transition at the start and in the middle; bit 1 has only the middle transition.
In Alternate Mark Inversion the term mark comes from ______.
Mark (meaning 1) is a term from telegraphy.
A 56K modem can download at a rate of ______ Kbps and upload at a rate of ______ Kbps.
56K modems download at about 56 Kbps but upload only at 33.6 Kbps.
At the ______ layer, a DCE takes data generated by a DTE.
The DCE converts the DTE's data into signals at the physical layer.
______ requires more bandwidth.
FSK uses two carrier frequencies, so its bandwidth is baud rate plus the frequency shift, larger than ASK/PSK/QAM.
Which one is not among the standards creation committees?
ITU-T and IEEE are standards creation committees; ISOC/IETF are Internet standards bodies, listed separately.
Set of rules that govern communication is called ______.
A protocol is a set of rules governing data communication.
Frequency of a failure and network recovery time after a failure are measures of the ______ of a network.
Reliability is measured by failure frequency and recovery time after a failure.
3dB bandwidth is also called power bandwidth.
3dB bandwidth is the half-power bandwidth, not the (99%) power bandwidth.
Packet switching is a connection-oriented service.
Packet (datagram) switching is connectionless; each packet is routed independently.
The internet model consists of ______ layers.
The Internet (TCP/IP) model has five layers: physical, data link, network, transport and application.
Analog-to-digital conversion is also termed as modulating an analog signal.
Analog-to-digital conversion is called digitizing an analog signal, not modulating it.
PCM is the first process of PAM.
It is the reverse: PAM is the first step of PCM.
A modulator converts a(n) ______ signal to a(n) ______ signal.
A modulator turns digital data into an analog signal.
The ______ layer changes bits into electromagnetic signals.
The physical layer converts bits into signals for the medium.
We need ______ to decompose a composite signal into its components.
Fourier analysis breaks a composite signal into its sine-wave components.
There are ______ possible (popular) variations of 16-QAM.
Three common 16-QAM constellations are described (e.g. 3 amplitudes/12 phases, 4/8, and 2/8 style).
Number of signal units per second that are required to represent a bit is called bit rate.
Signal units per second is the baud rate; bit rate is bits per second.
______ is a multipoint topology.
A bus shares one backbone cable among all devices, a multipoint link.
As the data packet moves from the lower to the upper layers, headers are ______.
Each receiving layer removes its peer's header as data moves up.
Data chunk at data link layer is called ______.
The data link layer's data unit is a frame.
The ______ layer is the layer closest to the transmission medium.
The physical layer sits directly on the transmission medium.
Which layer is responsible for source-to-destination delivery of the entire message?
The transport layer delivers the whole message end to end; the network layer delivers individual packets.
Encryption and encoding are the same terms.
Encryption secures data; encoding converts data into a signal or format.
TCP/IP model application layer incorporates OSI application and presentation layers.
The TCP/IP application layer covers the OSI session, presentation and application layers.
A sine wave must be an analog signal.
A sine wave varies continuously, so it is an analog signal.
A periodic signal can always be decomposed into ______.
By Fourier analysis any periodic signal is a sum of sine waves.
Manchester is a type of ______ encoding.
Manchester and differential Manchester are the biphase schemes.
Modulation of an analog signal can be accomplished through changing the ______ of the carrier signal.
AM, FM and PM change amplitude, frequency or phase of the carrier.
In ______ transmission, bits are transmitted over a single wire, one at a time.
Both forms of serial transmission send one bit at a time over one line.
In RS-422 balanced mode two lines carry ______ signals which are not identical to each other.
In balanced mode both lines carry the same signal, one being the complement of the other, so they are not identical.
The ______ generates the data and passes it along with any control information to a ______.
The DTE is the data source/sink and hands data to the DCE, which converts it for the network.
In ______ transmission, a start bit and a stop bit frame a character byte.
Asynchronous serial transmission frames each byte with start and stop bits.
In ______ transmission, bits are transmitted simultaneously, each across its own wire.
Parallel transmission sends n bits at once over n wires.
In ______ transmission the timing of the signal is unimportant.
Asynchronous transmission resynchronizes on each start bit, so overall signal timing is unimportant.
In 8-QAM each signal shift or one baud represents ______.
8 signal states need log2(8) = 3 bits per baud.
Biphase encoding is a type of bipolar encoding in which we use two voltage levels.
Biphase (Manchester, differential Manchester) is a polar scheme; bipolar uses three levels (positive, zero, negative).
The amplitude of a digital signal depends upon the ______ to represent a bit.
A digital signal's amplitude is the voltage level used for a bit.
Time domain plot shows changes in signal phase with respect to time.
A time-domain plot shows amplitude against time, not phase.
______ representation of links that connect nodes is called as physical topology.
Topology is the geometric representation of the links and nodes of a network.
In mesh topology, if there are five nodes then there will be ______ links.
A full mesh needs n(n-1)/2 = 5x4/2 = 10 links.
Non-proprietary standard is also termed as de facto standard.
De facto standards are divided into proprietary and non-proprietary ones, so a non-proprietary standard is a de facto standard.
Secondary hub in a tree must be a passive hub.
Secondary hubs in a tree can be active or passive.
When data are transmitted from device A to device B, the header from A's layer 4 is read by B's ______ layer.
Each layer's header is read by the peer layer; layer 4 is transport.
The inversion of the level at 1 bit is called as ______.
In NRZ-I the signal level inverts whenever a 1 bit occurs.
Biphase and bipolar are same terms.
Biphase is polar with mid-bit transitions; bipolar uses three levels with alternating 1s.
The last process in PCM is ______ digital data into digital signal.
After PAM, quantization and binary encoding, PCM ends with line encoding of the digital data into a digital signal.
Which modulation technique involves tribits, eight different phase shifts, and one amplitude?
8-PSK uses 8 phases at one amplitude, each carrying 3 bits (a tribit).
Synchronous transmission has ______.
Synchronous transmission sends a continuous bit stream without start/stop bits or gaps.
A human brain is considered as a ______.
A DTE is any source or sink of digital data, which can include a human brain.
The last modified version of EIA-232 standard is ______.
Among the given versions, EIA-232-D is the latest revision.
No MCQs match this filter.Is filter mein koi MCQ nahi.
No short questions added yet.Abhi koi short sawal shamil nahi.
No long questions added yet.Abhi koi long sawal shamil nahi.